Beurer PM 58 Specifications download pdf (Page 25)

However, these standard values serve only as a general

guideline, as the individual blood pressure varies in different

people and different age groups etc.

It is important to consult your doctor regularly for advice.

Your doctor will tell you your individual values for normal

blood pressure as well as the value above which your blood

pressure is classified as dangerous.

The WHO classification in the display shows the range of

the measured blood pressure.

If the values for systolic and diastolic pressure are in two

different WHO ranges (e.g. systolic in the grade hyperten-

sion range and diastolic pressure in the normal range), the

WHO classification on the unit always indicates the higher

range (grade hypertension in the example described).

7. Saving, retrieving and deleting results

•

The results of each successful measurement are stored

together with date and time. With more than 60 items of

measured data, the earliest items of data measured are

lost.

•

Move the touch screen activation switch to the ON posi-

tion.

•

Make a selection with the MEM button, and then confirm

the desired user memory with the START/STOP button .

If you press the MEM button again, the average value of

all the stored measured values in the user memory will be

displayed. If you press the MEM button again, the aver-

age value of the last 7 days for the morning measurement

will be displayed (Morning: 5 a.m. – 9 a.m., display

). If

you press the MEM button again, the average value of the

last 7 days for the evening measurement will be displayed

(Evening: 6 p.m. – 8 p.m., display

). If you continue to

press the MEM button, the most recent individual meas-

ured values with date and time are displayed in turn.

•

You can delete the memory by pressing and holding the

MEM button for 3 seconds. All the values in the current

user memory are deleted after three beeps are output.

•

To switch off the device, press the MEM button again or

the START/STOP button

or push the touch screen acti-

vation switch to OFF.

•

If you forget to switch off the device, it will switch off

automatically after 2 minutes.

8. Error messages/trouble-shooting

In case of faults, the _ message appears in the display.

Error messages may appear if:

• systolic or diastolic pressure could not be measured (

or appears on the display)

• systolic or diastolic pressure was outside the measure-

ment range ( or Lo appears on the display)

• the cuff is fastened too tightly or loosely ( or

appears on the display)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 115 116

Comments to this Manuals

No comments

Beurer PM 58 Specifications Page 25

Comments to this Manuals