Beurer HDE 30 User Manual download pdf (Page 14)

6. Operation

Important

• Do not jam the mains cable [8] e.g. in a drawer or door.

• Straighten the mains cable [8] if it becomes twisted.

• Do not pull, twist or kink the mains cable [8]; do not pull or lay it across/on sharp, pointy objects or

hot surfaces.

Warning

• Stand on a dry, electrically non-conductive surface.

• Ensure that your hands are dry!

• Dry your hair beforehand with a towel.

• Depending on the switch setting and duration of use, the volume diuser [1], professional nozzle

[9] and hair dryer can become very hot – burn and ﬁre hazard!

• Do not touch the volume diuser [1] and the professional nozzle [9].

• Let the volume diuser [1] and professional nozzle [9] cool down ﬁrst before you remove them.

• Place the hair dryer only on a non combustible surface.

• Ensure that there are no highly ﬂammable liquids in the vicinity of the unit.

• Do not use the unit on artiﬁcial hair – ﬁre hazard!

• Ensure that no hair can be directly sucked in.

Note

After switching on the unit for the ﬁrst time, a light odour develops for the ﬁrst minutes. This is

normal and not hazardous to your health. Let the unit run for three to ﬁve minutes. Then you can use

the unit normally.

• If the unit becomes overheated, it switches o automatically for your safety.

• Remove the plug from the socket and let the unit cool down.

• Before switching the unit on again, check the air outlet [2] and the ﬁlter [3] for blockage (e.g.

sucked-in lint, dust, hair).

• Switch on the travel hair dryer via the slide switch [6.1]:

Strong airﬂow

Gentle airﬂow

• Select the heat level:

High temperature

Medium temperature

Low temperature

• Dry and/or style your hair as you wish.

After each use/interruption, always set the hair dryer slide switch [6.1] to o (position 0).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 83 84

No comments

Beurer HDE 30 User Manual Page 14