Beurer BF 66 Instruction Manual download pdf (Page 7)

CAUTION:

•

If a battery has leaked do not touch the battery fluid. Avoid skin contact (e.g. put on protective

gloves) and clean the battery compartment with a dry cloth.

NOTICE:

•

Always use the size and type of batteries indicated.

•

Never use different types of batteries, battery brands or batteries with different capacities.

•

Never use rechargeable batteries. This may damage the unit.

•

Always replace all batteries at the same time and use batteries of the same type.

•

Replace weak batteries before they discharge completely. When “Lo” appears in the display

please change the batteries.

•

Leaking batteries may damage the device. If you do not intend to use the scale for longer periods,

remove the batteries from the battery compartment before placing the device in storage.

•

To avoid draining the batteries do not place any items on the scale (Please make sure that there

is no weight on the feet of the scale) when not in use.

•

Batteries can contain toxins that are harmful to the environment. Always dispose of batteries in

accordance with applicable local regulations. Do not dispose of batteries with normal house-

hold waste.

Remove the batteries from the protective packaging and

insert with the correct polarity.

See the diagram inside the battery compartment.

When the batteries are inserted, the scale switches on auto-

matically in set-up mode (see Point 6). The date display will

begin flashing. If the scale fails to operate, remove the bat-

teries completely and reinsert them. Replace the battery

cover carefully.

Your scale is fitted with a “change battery” indicator. If the

scale is operating with a battery which is too weak, “Lo”

appears on the display and the scale will switch off auto-

matically. In this case, the batteries must be replaced (3 x

1.5 V, AAA).

New batteries will last for approximately two years if the unit

is used three times per day. Trial batteries supplied with the unit may have a shorter life.

6. Settings

Enter your personal information before using the scale. If no buttons are pressed for 90 seconds during the

set-up procedure, the scale switches off and any information previously entered is lost.

Setting the date, time and measuring unit

Press the [set] button when the display is switched off. The [set] button lights up and the date indicator

flashes on the display. Set the date, time and measuring unit (kg, lb, st) one after the other by pressing the

or buttons.

•

Modifying values: Press or or press and hold for more rapid progress.

•

Confirming entries: Press the [set] button.

After your entries are made, “End” appears on the display and the information is saved.

Setting user data

You have to enter personal user parameters in order to measure your body fat percentage and other physi-

cal data.

The scale has 10 memory positions in which you and other members of your family can save and retrieve

personal settings.

•

Switch on the scale by tapping the scale briefly, forcefully and in an easily audible manner.

•

Wait until the display shows “0.0”.

•

Press the [set] button to start changing the settings. The first memory position flashes on the display.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Comments to this Manuals

No comments

Beurer BF 66 Instruction Manual Page 7

Comments to this Manuals

Related products and manuals for Kitchen scales Beurer BF 66