Beurer AS50 Instruction for Use download pdf (Page 25)

Wearing the activity sensor as a wristwatch

Your activity sensor can be worn on your wrist like a wristwatch. To

do this, please use the wristband supplied. To attach the device to the

wristband proceed as follows:

Put the casing into the wristband. Lift

the bars (1), which enclose the buttons

on the side, carefully over the buttons.

Pay attention to the position of the USB

connector (2).

The casing has to be firmly and directly

attached to the wristband, there must

be no gap. Otherwise, there is a risk of

the activity sensor's casing detaching

itself.

For the majority of users, sensitivity levels 1 or 3 are ideal when

wearing the activity sensor as a wristwatch. However the value

should be adjusted individually.

Pace counting on the activity sensor

As soon as you have run at least 10 paces in one go, the number of

paces and the activity time are updated on the display. These initial

paces are taken into account for pace counting.

Change basic settings

Set sensitivity and change basic functions

To achieve an optimum result, the sensitivity of the device should be

individually set for the user. Five sensitivity levels can be selected

here (1=Low sensitivity, 5=High sensitivity). The slower your running

speed, the higher sensitivity level you should select.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

No comments

Beurer AS50 Instruction for Use Page 25