Beurer BC 30 User Manual download pdf (Page 17)

•

In order not to distort the result, it is important to keep still

during the measurement and not talk.

Performing the blood pressure measurement

•

As described above, attach the cuff and adopt the posture

in which you want to perform the measurement.

•

Start the blood pressure monitor with the on/off button .

The most recently used user memory ( , or )

appears. To change the user memory, press the function

button SET.

•

Now start the measurement by holding the on/off button .

•

Following the display check, during which all numbers light

up, the cuff inflates automatically. Whilst the cuff is pumping

up, the device already calculates measurements for estimat-

ing the necessary pump pressure. If this pressure is insuffi-

cient, the device automatically pumps more pressure.

•

Then the pressure in the cuff is slowly released and as

soon as a pulse is detected, the pulse symbol flashes.

Measuring can be cancelled at any time by pressing the

on/off button and the device switches to standby

mode.

•

Systolic pressure, diastolic pressure and pulse readings are

displayed.

•

The measurement is automatically stored.

•

The symbol appears if the measurement could not be

performed properly. Observe the chapter “Error messages/

troubleshooting” in these instructions for use and repeat

the measurement.

•

The device switches off automatically after 1 minute.

Wait at least 5 minutes before taking another measurement!

Evaluating results

Cardiac arrhythmia:

This instrument can identify possible cardiac arrhythmia dis-

orders during measurement and if necessary indicates the

measurement with the flashing icon

This may be an indicator for arrhythmia. Arrhythmia is a

condition where the heart rhythm is abnormal as a result of

defects in the bioelectrical system controlling the heart beat.

The symptoms (omitted or premature heart beats, slow or

excessively fast heart rate) may be caused, among other

things, by heart disease, age, physical predisposition, exces-

sive use of stimulants, stress or lack of sleep. Arrhythmia can

only be ascertained through examination by your doctor.

Repeat the measurement if the flashing icon is displayed

after the measurement. Please note that you should rest for

5 minutes between measurements and not talk or move dur-

ing the measurement. If the icon appears often, please

contact your doctor. Any self-diagnosis and treatment based

on the test results may be dangerous. It is vital to follow your

doctor’s instructions.

WHO classification:

According to WHO Guidelines/Definitions and the latest find-

ings, the test results can be classified and evaluated accord-

ing to the following chart:

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 79 80

Comments to this Manuals

No comments

Beurer BC 30 User Manual Page 17

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer BC 30