Beurer BM 19 User Manual download pdf (Page 19)

rately or to save morning and evening measurement values

separately.

Measuring blood pressure

•

Put on the cuff as described previously and assume the posi-

tion in which you want to carry out the measurement.

•

Start the measurement process by pressing ON/OFF button

. After checking the display with all digits lighting up, the

monitor will automatically inflate. Following the self-test, dur-

ing which all display elements briefly appear, the measure-

ment begins. During inflation the device already determines

measured values used to estimate the required inflation pres-

sure. If this pressure is insufficient, the device automatically

inflates by another 40 mmHg (Real Fuzzy Logic).

•

Then the pressure in the cuff is slowly released and the pulse

is measured.

•

When the measurement has been completed, the remain ing

air pressure is released very quickly. The pulse, the systolic

and the diastolic blood pressure are displayed.

•

You can adjust the volume during the announcement by

pressing + and -.

•

You can interrupt measurement at any time by pressing the

ON/OFF button .

•

The icon appears if it has not been possible to per-

form the measurement properly. Observe the section in these

instructions on error messages/troubleshooting and repeat

the measurement.

•

The device switches off automatically after 1 minute.

Wait at least 5 minutes before taking another measurement!

Evaluating results

Cardiac arrhythmia:

This instrument can identify possible cardiac arrhythmia disor-

ders during measurement and if necessary indicates the meas-

urement with the flashing icon

This may be an indicator for arrhythmia. Arrhythmia is a condi-

tion where the heart rhythm is abnormal as a result of defects

in the bioelectrical system controlling the heart beat. The

symptoms (omitted or premature heart beats, slow or exces-

sively fast heart rate) may be caused, among other things,

by heart disease, age, physical predisposition, excessive use

of stimulants, stress or lack of sleep. Arrhythmia can only be

ascertained through examination by your doctor.

Repeat the measurement if the flashing icon is displayed

after the measurement. Please note that you should rest for 5

minutes between measurements and not talk or move during

the measurement. If the icon appears often, please con-

tact your doctor. Any self-diagnosis and treatment based on

the test results may be dangerous. It is vital to follow your doc-

tor‘s instructions.

WHO classification:

In accordance with the guidelines/definitions of the World

Heath Organization and the latest findings, the measurements

can be classified and assessed according to the following

table.

However, these standard values serve only as a general guide-

line, as the individual blood pressure varies in different people

and different age groups etc.

It is important to consult your doctor regularly for advice. Your

doctor will tell you your individual values for normal blood pres-

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 91 92

Comments to this Manuals

No comments

Beurer BM 19 User Manual Page 19

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer BM 19