Beurer MG 200 User Manual download pdf (Page 13)

6. Start-up

CAUTION

•

IMPORTANT: Deactivate the transport lock on the massagemechanism before starting-up

for the first time. Remove the screw on the reverse side of the seat cover using the tool sup-

plied. The Shiatsu seat cover will be irreparably damaged and unusable if the transport lock

screw is not removed and the Shiatsu seat cover is operated immediately. No guarantee is

accepted in this case.

•

Insert the transport lock screw each time the device is transported again. The device may be ir

reparably damaged if it is transported without the transport lock.

•

Fasten the protective cover to the surface of the Shiatsu seat cover with the Velcro straps. It is also

possible to massage without the protective cover; this is generally found to be “harder”.

•

Position the seat cover upright on a suitable seating arrangement with seating surface and backrest

(chair, sofa, or similar). Ensure that the seat cover is supported over its entire area and has a suf-

ficiently high backrest.

•

Use the flexible fastening straps and Velcro strips to secure the Shiatsu seat cover.

•

Connect the device to the mains power supply.

7. Operation

Gently press your back against the massage device to start with. Then make sure that you are in a comfort-

able position before gradually shifting your weight onto the massage device.The massage must be pleasant

and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is

painful or unpleasant.

•

Do not force any part of your body, in particular your fingers, between the rotating massage heads and

their mountings in the device.

•

Sit comfortably and upright on the seat cover. Ensure you sit centered and such that the massage heads

can move to the left and right of your spinal column.

•

Switch on the massage device with the button. Select the region you wish to massage with the full

back/upper back/lower back button.

The LED lamp indicates the massage region set.

•

The Shiatsu massage unit with rotating massage heads slowly moves upwards from the starting position

in the lowest region of the back and moves up and down in the massage region set. Application only at a

single point is not possible, as the rotational movement and the displacement up and down are coupled.

•

The automatic switch-off function is activated with selection of the massage region and is preset to 15

minutes. You can set the automatic switch-off function to 5, 10 or 15 minutes by pressing the timer but-

ton. Please note that changing the timer setting makes the timer start to count again from the beginning.

To avoid overheating the device, select the maximum massage duration at the beginning of the massage

and do not change it again during the massage.

•

Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device

for longer can over-stimulate the muscles and cause tension instead of relaxation. The massage can be

finished at any time by pressing the

button. Please note that on switching off, the massage heads first

return to the starting position at the lumbar region. This is indicated by the LED flashing. Once this position

is reached, the device switches off.

•

If the device is stopped using the shiatsu button, it returns to the start position and switches itself off.

•

Do not disconnect the device from the mains supply during operation. Always switch it off only once it has

reached the starting position at the bottom.

•

Do not use the massage device for longer than 15 minutes and then allow it to cool. Using the device for

longer can over-stimulate the muscles and cause tension instead of relaxation.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Comments to this Manuals

No comments

Beurer MG 200 User Manual Page 13

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer MG 200