Beurer GL50 Specifications download pdf (Page 18)

18 Beurer GL50 mg/dL

Remove the protective lancet disc

Remove the protective lancet disc by turning clockwise. Retain the

protective disc for the safe disposal of the used lancet needle after

taking a blood sample.

Select cap and attach.

You need to use a dierent cap depending on the area from which you

take the sample:

- Fingertip: Cap (black)

- Other body parts: AST cap (transparent)

Warning

Do not use the AST cap to take blood samples from the ﬁnger.

Place the selected cap on the lancing device. Make sure that the curved

part of the cap ﬁts on the curved part of the lancing device. Press ﬁrmly

on the cap until it audibly engages.

Select the penetration depth

You can set seven dierent penetration depths on the lancing device

using the dial with raised bars. The length of the bar represents the re-

quired penetration depth.

•

1 to 2: soft or thin skin

•

3 to 5: normal skin

•

6 to 7: thick or callous skin

Turn the dial until the required bar is in the centre of the black mark-

ing.

Tension the lancing device

Pull the slider in the direction of the arrow (to the right in the image) un-

til it stops and then release. The slider automatically springs back into

position. The lancing device is now tensioned.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

No comments

Beurer GL50 Specifications Page 18