Beurer BM 35 User Manual download pdf (Page 16)

4. Prepare measurement

Inserting battery

•

Remove the battery cover from

the back of the monitor.

•

Insert four AAA 1.5 V alkaline bat-

teries. Making absolutely sure

that you insert them with the cor-

rect polarity as marked. Never use

rechargeable batteries.

•

Replace the battery cover carefully

If the battery change

is continuously illuminated, meas-

urement is no longer possible and you must replace all the bat-

teries. Once batteries have been removed from the device, the

time must be reset.

Used batteries do not belong in the household waste. You are

legally obliged to dispose of the batteries. Dispose of them via

your specialist electrical supplier or local collecting point for

recyclable waste

Note: Batteries containing pollutant substances

are marked as follows: Pb = Battery contains

lead, Cd = Battery contains cadmium,

Hg = Battery contains mercury.

Setting date, time and language

It is vital to set the date and time. This is the only way that

measurements can be saved and recalled with the correct date

and time. The time is shown in 24 hour format.

Proceed as follows to set the date and time:

•

Switch on the blood pressure monitor with the button.

•

Press the function key for over 5 seconds .

•

The month starts flashing. Using the + function key, set the

month 1 to 12 and confirm with the function key .

•

Set the day, hour and minute and confirm in each case with

the function key .

•

Confirm your selection with the function key .

5. Measuring blood pressure

Positioning cuff

Fit the cuff round your bare left upper

arm. Blood circulation in the arm

should not be restricted by tight cloth-

ing or other objects.

The cuff should be placed on the

upper arm so that the lower edge is 2

to 3 cm above the bend of the elbow

and above the artery. The tube should

be in line with the centre of the palm.

Now place the free end of the cuff

snugly, but not too tightly, around the

arm, and fix it with the Velcro fastener.

The cuff should be fitted tight enough

to allow just two fingers to fit beneath

the cuff.

Insert the cuff tubing into the socket

for the cuff attachment.

4 x AAA (LR03) 1,5

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 79 80

Comments to this Manuals

No comments

Beurer BM 35 User Manual Page 16

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer BM 35