Beurer BM 35 User Manual download pdf (Page 17)

Important: The instrument should only be operated with the

original cuff. The cuff is suitable for an arm circumference of

23 to 33 cm.

Correct posture

•

Rest for approx. 5 minutes before each measurement. Other-

wise there may be divergences.

•

You can perform the measurement either sitting or lying down.

Always make sure that the cuff is on a level with your heart.

•

To carry out a blood pressure measurement, make sure you

are sitting comfortably with your arms and back leaning on

something. Do not cross your legs. Place your feet flat on the

ground.

•

In order not to distort the result, it is important to keep still

during the measurement and not talk.

Select memory

Switch on the blood pressure monitor with the

button.

Select the required memory space by pressing the function key

+. You have two memories (60 memory spaces each) in order

to save the test results of 2 different people separately, or else

save measurements in the morning and evening separately.

Measuring blood pressure

•

Put on the cuff as described previously and assume the posi-

tion in which you want to carry out the measurement.

•

Using the buttons +, select the user memory 1 or 2. Start the

measurement process by pressing ON/OFF button . After

checking the display with all digits lighting up, the monitor

will automatically inflate. Following the self-test, during which

all display elements briefly appear, the measurement begins.

During inflation the device already determines measured val-

ues used to estimate the required inflation pressure. If this

pressure is insufficient, the device automatically inflates by

another.

•

Then the pressure in the cuff is slowly released and the pulse

is measured.

•

When the measurement has been completed, the remaining

air pressure is released very quickly. The pulse, the systolic

and the diastolic blood pressure are displayed.

•

You can interrupt measurement at any time by pressing the

ON/OFF button .

•

The _ icon appears if it has not been possible to perform

the measurement properly. Observe the section in these

instructions on error messages/troubleshooting and repeat

the measurement.

•

The device switches off automatically after 1 minute.

Wait at least 5 minutes before taking another measurement!

Evaluating results

Cardiac arrhythmia:

This instrument can identify possible cardiac arrhythmia disor-

ders during measurement and if necessary indicates the meas-

urement with the flashing icon

This may be an indicator for arrhythmia. Arrhythmia is a condi-

tion where the heart rhythm is abnormal as a result of defects

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 79 80

Comments to this Manuals

No comments

Beurer BM 35 User Manual Page 17

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer BM 35