Beurer IPL 10000+ User Manual download pdf (Page 39)

Note

The cartridge should only be replaced if there are large spots visible or if the lens is broken. If this is

the case, please contact Beurer Customer Services.

10. Trouble-shooting

“My beurer SalonPro System cannot be switched on”

•

Ensure that the mains cable is correctly connected to the beurer SalonPro System device.

•

Ensure that the mains cable is inserted into a wall socket.

“No light pulse is emitted when I press the trigger button”

• Ensure that the device is in full contact with the skin and that the light area is pressed onto the skin

evenly and firmly. For your safety, the trigger button only activates a pulse if the light area is pressed

firmly against the skin.

•

Check the indicator lamp. If the indicator lamp on the applicator is illuminated red, this indicates that

your skin colour, as measured by the skin colour sensor, is too dark for safe application. Test the

device on another part of your body or contact beurer SalonPro System Customer Services.

If the

indicator lamp

on the

applicator

is illuminated orange, this indicates that the contact with the

skin, as measured by the skin contact sensor, is insufficient. Increase the level of contact with the

skin

or contact beurer SalonPro System Customer Services.

• In the event of a general fault, all six energy indicator lamps flash green simultaneously. Reset the

device. To do this, switch the device off at the mains switch, wait for 30 seconds, then switch the

device back on at the mains switch. Should you still have problems with your device, please contact

Customer Services.

•

Check the

indicator lamp

. If the

indicator lamp

on the applicator is flashing red and the

indicator lamp

on the device is flashing green, this indicates that the cartridge is not inserted correctly in the applica-

tor. Reinsert the cartridge into the applicator.

11. Frequently asked questions

1. Does the beurer SalonPro System really work?

Yes. In clinical tests performed by doctors, it was proven that the technology in the beurer SalonPro

System can be used to safely achieve lasting hair removal results.

2. On which parts of my body can I use the beurer SalonPro System?

The beurer SalonPro System was designed for hair removal all over the body. The most common areas

that are treated with the beurer SalonPro System are the legs, armpits, arms, bikini zone and the face

below the cheekbones.

3. How long does a treatment session using the beurer SalonPro System last?

The time can vary depending on the area of the body being treated. A full body treatment (legs, arms,

armpits, bikini zone and face below the cheekbones) takes approximately 26 minutes. As the beurer

SalonPro System is operated using electricity, it can be used for as long as necessary to perform a full

hair removal session on the desired area(s) of the body.

4. Is the beurer SalonPro System safe?

The beurer SalonPro System was developed with a strong focus on your safety and employs clinically

tested technology. However, this device – like any other product or electronic device intended for applica-

tion on the skin – must be used in accordance with the instructions for use and the safety notes for users.

5. Is using the beurer SalonPro System painful?

When used correctly, most users of the beurer SalonPro System report a slight warm feeling when the

light pulse is issued. Users with thicker and darker hair could feel slightly more discomfort, but this

should subside once the hair removal session is finished. The beurer SalonPro System features six

energy level settings that you can select according to your sensitivity.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 127 128

Comments to this Manuals

No comments

Beurer IPL 10000+ User Manual Page 39

Comments to this Manuals

Related products and manuals for Cosmetic tools Beurer IPL 10000+