Beurer GS 42 User Manual download pdf (Page 14)

The setting to be changed will ash each time.

• To change a setting, press the buttons

and .

• To save the setting and move onto the next one, or to close the setting, press the SET button.

The scale will switch o automatically after this procedure.

The scale will also switch o if no buttons are pressed for more than 15 seconds.

Setting user data

The scale comes equipped with 10 locations for storing user data and space for more than 10

measurement values per user. You and, for example, the members of your family can save and

later access the following personal settings in the storage locations:

Sequence User data Parameters

1 Memory position 1 to 10

2 Body height 100 to 220 cm

(3'-03" to 7'-03")

Switch on the scale (see 7. Switch on the scale). When “0.0 kg” is displayed:

• Press the 'USER' button until you have reached the desired memory space. After the display

shows the preset body height “0.0 kg” will appear.

• To change the body height press “SET”.

• Press the

and buttons to set your height. Keep button pressed for quicker run.

• Finish entering data by pressing the SET button.

SET

USER 3 sec

2 sec

Please note: if you change the height value at a later date, all measurement data

saved in your storage location up until that point will be deleted.

9 Operation

Weighing yourself and calculating BMI

To weigh yourself and to calculate your personal body mass index:

• Switch on the scale (see 7. Switch on the scale).

• Then select the storage location where your settings have been saved using the 'USER' button.

Next, your saved height value will be displayed. Wait until “0.0 kg” is displayed again. You can

now use the scale. Stand still whilst weighing yourself.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

No comments

Beurer GS 42 User Manual Page 14