Beurer GL 44 (mg/dL) User Manual download pdf (Page 33)

Beurer GL44 mg/dL 33

Cause Solution

Test strip inserted incorrectly or not completely.

Firmly insert the test strip into the slot on the

device with the contacts ﬁrst. Make sure that

the front of the test strip is facing you (see “Test

strip” on page 12).

Device faulty. Contact customer service.

Problem: the test does not start after inserting the test strip into the device and applying blood

Cause Solution

Insucient amount of blood or test strip not

ﬁlled correctly.

Repeat test using a new test strip and a larger

drop of blood. Please note the correct ﬁlling of

the test strip (see page 20).

Faulty test strip. Repeat the test using a new test strip.

Blood was applied while the device was switched

o.

Repeat the test using a new test strip and only

apply blood after and ﬂash.

The basic settings of the device were changed

and the changes were not completed (see “Mak-

ing and changing basic settings” on page 14).

Remove the test strip and press the “On/O”

button until “ ” is displayed.

Repeat test.

Device faulty. Contact customer service.

9 technical specifications

Dimensions (W x H x D) 52 x 95 x 16 mm

Weight 44 g incl. batteries

Power supply 2 x 3 V CR 2032 button cell batteries

Battery life

500 measurements with backlighting

1000 measurements without backlighting

Measured value memory 480 measured values with date/time

Data retained when batteries are changed

Average values for 7, 14, 30, 90 days

Automatic switch-o Two minutes after last actuation

Storage/

transport temperature

Temperature: +2 °C – +30 °C

Relative humidity: < 90 %

Operating ranges Temperature: +10 °C – +40 °C

Relative humidity: < 90 % non-condensing

Measuring range, glucose Glucose: 20 – 630 mg/dL

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments

Beurer GL 44 (mg/dL) User Manual Page 33

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer GL 44 (mg/dL)