Beurer GL50 Specifications download pdf (Page 35)

Beurer GL50 mg/dL 35

9 technical specifications

Dimensions (L x W x H) 123 x 28 x 16 mm

Weight 36 g (incl. batteries)

Power supply 2 x 3 V CR 2032 button cell batteries

Battery life

Over 1000 measurements

Measured value memory 480 measured values with date/time

Data retained when batteries are changed

Average values for 7, 14, 30, 90 days

Automatic switch-o Two minutes after last actuation

Storage/

transport temperature

Temperature: +2°C – +30°C

Relative humidity: < 90%

Operating ranges Temperature: +10°C – +40°C

Relative humidity: < 90% non-condensing

Measuring range, glucose Glucose: 20 – 630 mg/dL

Blood sample capillary whole blood

Required volume of blood 0.6 microlitres

Blood glucose measuring duration Approx. 5 seconds

Calibration Plasma

Test procedure Amperometric bio sensor

Usage Suitable for self-testing

System function test Each time device is switched on

EMC

This device complies with the European standard EN 61326 and is subject to speciﬁc precautions

with regard to electromagnetic compatibility. Please note that portable and mobile HF communica-

tion systems may interfere with this unit. For more details, please contact Customer Services at the

address indicated.

Test strip functionality

Test strips enable a quantitative measurement of the glucose level in fresh whole blood. When the gap

for taking blood comes into contact with a drop of blood, it is automatically ﬁlled by simple capillary

action. The blood is sucked into the absorbing gap on the test strip and the blood glucose monitor

measures the blood glucose level in the blood.

The test is based on the measurement of an electric current that is generated by the chemical reaction

of the glucose with the enzyme glucose dehydrogenase (Aspergillus sp.) on the strip.

During the reaction, a mediator transports electrons through the electrode surface and so gener-

ates a current.

The blood glucose monitor analyses this current. The current ﬂow is proportional to the glucose con-

tent in the blood sample. The results are shown on the blood glucose monitor display.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40

No comments

Beurer GL50 Specifications Page 35