Beurer BF 100 User Manual download pdf (Page 21)

100

Kcal

Calorie consumption

•

Press the [ ] button on the control unit to switch to

the kcal screen. The theoretically calculated basal

metabolic rate (BMR) and active metabolic rate

(AMR) are shown in kcal.

Calling up the measurement memory from

standby

When the unit is switched off, the measurements from

an analysis are automatically saved. There are 30 mem-

ory locations for each user.

•

Switch on the control unit with the [ ] button.

•

Select your user number by pressing the [ ] button.

To do so, press the button repeatedly if necessary.

•

Press the [ , ] buttons on the control unit to scroll

through the analysis values or the [ , ] buttons

to enter the submenus (e.g. switch to BF,

Deleting details

1. Deleting a user and all settings and saved values

•

Switch the device on and select your user number by

pressing the [ ] button. To do this, press the button

repeatedly and confirm with [SET].

•

When 0.0 appears on the display, press and hold the

[SET] button for 5 seconds to delete the user.

•

Use the [ , ] buttons to select “YES” and confirm

the prompt with the [SET] button. If you do not wish

to delete the user, select “NO” and confirm with the

[SET] button.

All saved values and settings for this user are de-

leted.

2. Deleting individual saved values for a user

•

From the “Mem” measurement memory, select a

measurement and briefly press the [SET] button on

the control unit to delete the displayed value from

the memory. You can also do this immediately after

the measurement has been taken.

•

Use the [ , ] buttons to select “YES” and confirm

the prompt with the [SET] button. If you do not wish

to delete the value, select “NO” and confirm with the

[SET] button.

3. Deleting all saved values for a user

•

Call up the “Mem” measurement memory and press

and hold the [SET] button on the control unit for ap-

proximately 3 seconds to delete all the values.

•

Use the [ , ] buttons to select “YES” and confirm

the prompt with the [SET] button. If you do not wish

to delete anything, select “NO” and confirm with the

[SET] button.

Switching off the scale (standby mode)

•

Wait until the display automatically switches itself

off after approximately 45 seconds or press the [ ]

button on the control unit to switch the display off

manually.

Date and time can still be seen.

Power-saving mode

•

Press and hold the and menu buttons simul-

taneously for 10 seconds. The date and time disap-

pear.

•

To switch back on again, press and hold the and

menu buttons simultaneously for 10 seconds.

11. Analysing results

Body fat percentage

The body fat values are displayed on the display and

analysed in the bar graph. The following body fat per-

centages are guide values (contact your physician for

further information).

Man

Age low normal high very high

10 –14 <11 % 11–16 % 16.1– 21 % >21.1 %

15 –19 <12 % 12 –17 % 17.1– 22 % >22.1 %

20 – 29 <13 % 13 –18 % 18.1– 23 % >23.1 %

30 – 39 <14 % 14 –19 % 19.1– 24 % >24.1 %

40 – 49 <15 % 15 – 20 % 20.1– 25 % >25.1 %

50 – 59 <16 % 16 – 21 % 21.1– 26 % >26.1 %

60 – 69 <17 % 17 – 22 % 22.1– 27 % >27.1 %

70 –100 <18 % 18 – 23 % 23.1– 28 % >28.1 %

Woman

Age low normal high very high

10 –14 <16 % 16 – 21 % 21.1– 26 % >26.1 %

15 –19 <17 % 17 – 22 % 22.1– 27 % >27.1 %

20 – 29 <18 % 18 – 23 % 23.1– 28 % >28.1 %

30 – 39 <19 % 19 – 24 % 24.1– 29 % >29.1 %

40 – 49 <20 % 20 – 25 % 25.1– 30 % >30.1 %

50 – 59 <21 % 21– 26 % 26.1– 31 % >31.1 %

60 – 69 <22 % 22 – 27 % 27.1– 32 % >32.1 %

70 –100 <23 % 23 – 28 % 28.1– 33 % >33.1 %

A lower value is often found in athletes. Depending on

the type of sports, training intensity and physical con-

stitution, values may result which are below the rec-

ommended values stated. It should, however, be noted

that there could be a danger to health in the case of

extremely low values.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 99 100

Comments to this Manuals

No comments

Beurer BF 100 User Manual Page 21

Comments to this Manuals

Related products and manuals for Scales Beurer BF 100