Beurer GL 40 (mg/dL) User Manual download pdf (Page 27)

Beurer GL40 mg/dL 27

Test strip inserted incorrectly or not completely.

Insert the test strip, contacts ﬁrst, into the slot

on the unit. Ensure that the front side of the test

strip is facing you (see "Test strips", page 12).

Unit is defective Contact customer service.

Problem: After inserting the test strip into the unit and applying the blood, the test does not start.

Cause Solution

Insucient quantity of blood

Repeat the test using a new test strip and larger

blood drop.

Test strip is defective Repeat the test using a new test strip.

Blood was applied while the device was switched

o.

Repeat the test using a new test strip and only

apply blood after and ﬂash.

Theunit'sbasicsettingswerechangedandthe

change was not completed (see "Basic set-

tings", page 14).

Press the "On/O" button until “ ” is dis-

played.

Repeat test.

Unit is defective Contact customer service.

9 technicAl specificAtions

Dimensions (W x H x D) 47 x 85 x 14 mm

Weight 43 g incl. batteries

Power supply 2 x 3 V CR 2032 button cell batteries

Battery life More than 1000 measurements

Measured value memory 480 measured values with date/time

Data retained upon changing batteries

Average values for 7, 14, 30, 90 days

Automatic switch-o Two minutes after last actuation

Storage/

transport temperature

Temperature:+2°C–+30°C

Relative humidity: < 90 %

Operating ranges Temperature:+10°C–+30°C

Relative humidity: < 90 % non-condensing

Measuring range, glucose Glucose: 20 - 630 mg/dL

Blood sample capillary whole blood

Amount of blood 0.6 microlitres

Blood glucose measuring duration Approx. 5 seconds

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

No comments

Beurer GL 40 (mg/dL) User Manual Page 27