Beurer GL 50 evo (mgdl) User Manual download pdf (Page 15)

Beurer GL50 evo mg/dL 15

4.2 Making and changing basic settings

Setting the date and time

To activate the device, set the sliding switch for on/o to setting “(on)”.

o

The sliding switch for on/o serves as a key lock for the scroll wheel.

Note

You must set the date and time. Otherwise, you will not be able to save your measured values

correctly with a date and time and access them again later.

The time can be displayed in 12-hour format or 24-hour format.

1. Switch on the blood glucose monitor by brieﬂy pressing and holding the scroll wheel.

2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll

wheel.

3. Rotate the scroll wheel until the arrow is pointing towards “date/time”, then press the scroll

wheel.

4. Press the scroll wheel. Set the year by rotating the scroll wheel, then press the scroll wheel.

5. Rotate the scroll wheel to next setting point and press the scroll wheel. Use the same pro

cedure to set the month, day, 24 h or 12 h mode, hour and minute.

6. To save the settings, rotate the scroll wheel until the arrow is pointing towards “save” and

conﬁrm by pressing the scroll wheel.

Setting the alarm

You can set an alarm on the blood glucose monitor. An acoustic signal sounds to the set alarm

time. You can set 4 dierent alarm times. To set an alarm, proceed as follows:

1. Switch on the blood glucose monitor by brieﬂy pressing and holding the scroll wheel.

2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll

wheel to conﬁrm.

3. Rotate the scroll wheel until the arrow is pointing towards “alarm”, then press the scroll wheel.

4. Choose one of the four alarm times with the scroll wheel, then press the scroll wheel.

5. Rotate the scroll wheel until the hour is marked, then press the scroll wheel. Now set your

desired alarm hour by rotating the scroll wheel and press the scroll wheel to conﬁrm.

5. Use the same procedure to set the alarm minute.

6. In order to start the alarm, rotate the scroll wheel to “on” and press the scroll wheel.

7. In order to turn o the alarm, rotate the scroll wheel to “o” and press the scroll wheel.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

No comments

Beurer GL 50 evo (mgdl) User Manual Page 15