Beurer GL 50 evo (mgdl) User Manual download pdf (Page 16)

16 Beurer GL50 evo mg/dL

Setting the timer

You can set a timer on the blood glucose monitor. An acoustic signal sounds when the timer

elapses. To set a timer, proceed as follows:

1. Switch on the blood glucose monitor by brieﬂy pressing and holding the scroll wheel.

2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll

wheel to conﬁrm.

3. Rotate the scroll wheel until the arrow is pointing towards “timer”, then press the scroll wheel.

4. Press the scroll wheel. Rotate the scroll wheel until the hour is marked, then press the scroll

wheel. Now set your desired timer hour by rotating the scroll wheel and press the scroll

wheel to conﬁrm.

5. Use the same procedure to set the timer minute.

6. In order to start the timer, rotate the scroll wheel to “start” and press the scroll wheel.

Switch Bluetooth

on/o

You can switch on Bluetooth

on the blood glucose monitor. Data transfer with Bluetooth

only possible with the optinal Bluetooth

adapter.

1. Switch on the blood glucose monitor by brieﬂy pressing and holding the scroll wheel.

2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll

wheel.

3. Rotate the scroll wheel until the arrow is pointing towards “bluetooth on/o”, then press

the scroll wheel.

4. Rotate the scroll wheel until the arrow is pointing towards “bluetooth on”, then press the

scroll wheel. Bluetooth

is now switched on.

Switching the acoustic signal on/o

On the blood glucose monitor, you can switch on the acoustic signal, switch o the acoustic

signal or set a result beep.

1. Switch on the blood glucose monitor by brieﬂy pressing and holding the scroll wheel.

2. Rotate the scroll wheel until the arrow is pointing towards “settings”, then press the scroll

wheel.

3. Rotate the scroll wheel until the arrow is pointing towards “beep on/o”, then press the

scroll wheel.

4. Use the scroll wheel to select your desired setting (beep on, beep o or result beep) and

conﬁrm by pressing the scroll wheel.

Note

The result beep will feedback the measurement value as beep signals.

Example: Measurement value 103

start signal

beepbeep

number 1

short beep

number 2

long beep (for 0)

number 3

3 x short beep

The beep signals will be repeated 2 times and can be interrupted by rotating the scroll wheel.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Comments to this Manuals

No comments

Beurer GL 50 evo (mgdl) User Manual Page 16

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer GL 50 evo (mgdl)