Beurer MG 260 User Manual download pdf (Page 14)

6. Start-up

CAUTION

•

IMPORTANT: Before using the device for the first time, ensure you have released all transport

locks on the massage mechanism. To do this, remove the screws using the tool provided on

the rear of the seat cover. If the transport lock screws are not removed first and the Shiatsu

seat cover is used immediately, the device will become irreparably damaged and unusable.

The warranty will not apply in this instance.

•

 Reusethetransportlockscrewswhentransportingthedeviceinthefuture.Transportingthedevice

withoutusingthetransportlockscouldcauseirreparabledamagetothedevice.

• Positiontheseatcoveruprightonasuitableseatwithasittingareaandbackrest(chair,sofaor

similar). Make sure that the seat has a sufficiently high backrest.

•

 UsetheflexiblefasteningstrapsandVelcrostripstosecuretheShiatsuseatcover.

•

 Connectthedevicetothemainsbypluggingtheplugintothesocket.

7. Operation

Gentlypressyourbackagainstthemassagedevicetostartwith.Thenmakesurethatyouareinacomfort-

ablepositionbeforegraduallyshiftingyourweightontothemassagedevice.Themassagemustbepleasant

and relaxing at all times. Stop the massage or change your position or the contact pressure if you find it is

painful or unpleasant.

•

Do not force or jam any part of your body, in particular your fingers, between the rotating massage elements

or their holders in the unit.

•

Sitcomfortablyanduprightontheseatcover.Ensureyousitcenteredandsuchthatthemassageheads

canmovetotheleftandrightofyourspinalcolumn.

•

Switch on the massager with the button.

The LEDs signal the massage functions which are currently selected.

•

Theautomaticswitch-offfunctionisactivatedwithselectionofthemassageregionandispresetto15

minutes. You can set the automatic switch-off function to 5, 10 or 15 minutes by pressing the timer but-

ton. Please note that changing the timer setting makes the timer start to count again from the beginning.

Toavoidoverheatingthedevice,selectthemaximummassagedurationatthebeginningofthemassage

and do not change it again during the massage.

You can specify the settings as follows:

1. Demo run

Press the demobuttontobeginaquick5-minuterun-throughofthefunctionscontainedinthedevice.

ThemanualcontrollerindicateswhichfunctionisbeingdisplayedbyflashingtherespectiveLED.The

deviceswitchesoffautomaticallyoncethedemorunhasfinished.

2. Neck massage

Press the neck button to start the neck massage. Press neck (anti-clockwise rotation) or neck

(clockwise rotation) to change the direction of the massage.

3. Shiatsu back massage

Press the shiatsu button. Select the desired massage region with full back, upper back, lower back.

You can choose a spot massagei.e.aShiatsumassagewithoutverticalmovementbypressingthespot

button. You can change the position of the spot massage by holding down one of the arrows next to the

spot button until the desired position is reached.

Massage intensity

WhenusingtheShiatsuMassage,twodifferentmassagespeedsareavailable,whichcanbeselected

using the speedbutton.Ifyouhavetherollingmassageactivated,firstpresstheshiatsu button in order

to change to Shiatsu Massage and then set the desired massage speed.

4. Rolling massage

Press the rolling button. Select the desired massage region with full back, upper back, lower back.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 59 60

Comments to this Manuals

No comments

Beurer MG 260 User Manual Page 14

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer MG 260