Beurer BF 18 User Manual download pdf (Page 13)

7. Incorrect measurement

If the scale detects an error during weighing, „BF ” or “ ” appears in the display.

If you step onto the scale before “0.0” appears in the display, the scale will not operate properly.

Possible causes of error:

– The maximum load-bearing capacity of 150 kg

(330 lbs) was exceeded.

Remedy:

– Only weigh the maximum permissible weight.

– The electrical resistance between the electrodes

and the soles of your feed is too high (e.g. with

heavily callused skin).

– Repeat weighing barefoot. Slightly moisten the

soles of your feet if necessary. Remove the cal-

luses on the soles of your feet if necessary.

– Your body fat lies outside the measurable range

(less than 5 % or greater than 80 %).

– Repeat weighing barefoot.

– Slightly moisten the soles of your feet if neces-

sary.

– Your percentage of water lies outside the measu-

rable range (less than 43 % or greater than

75 %)

– Repeat weighing barefoot.

– Slightly moisten the soles of your feet if necessary.

8. Disposal

Used, fully discharged batteries must be disposed of in a specially labeled collection contai-

ner, at toxic waste collection points or through an electrical retailer. You are under legal obli-

gation to dispose of batteries correctly.

Note: You will find these markings on batteries containing harmful substances:

Pb = battery containing lead, Cd = battery containing cadmium, Hg = battery containing

mercury.

Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Electro-

nic Equipment).

If you have any queries, please contact the appropriate local authorities.

Pb Cd Hg

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

No comments

Beurer BF 18 User Manual Page 13