Beurer BC 16 User Manual download pdf (Page 18)

Correct posture

•

Rest for approx. 5 minutes before each measurement.

Otherwise there may be divergences.

•

You can perform the measurement while

sitting or lying. To carry out a blood

pressure measurement, make sure you

are sitting comfortably with your arms

and back leaning on something. Do not

cross your legs. Place your feet flat on

the ground. Make sure to rest your arm

and move it. Always make sure that the cuff is at heart

level. Otherwise significant deviations can occur. Relax

your arm and the palm of your hand.

•

In order not to distort the result, it is important to keep still

during the measurement and not talk.

Select memory

You have two memories (50 memory spaces each) in order to

save the test results of 2 different people separately, or else

save measurements in the morning and evening separately.

Select the required memory space by pressing the user

selection button

Measuring blood pressure

•

Put on the cuff as described previously and assume the

position in which you want to carry out the measurement.

•

Press the User-Switching key

to select a memory

zone, and press the key 2x to start measurement in

the chosen memory zone. After checking the display with

all digits lighting up, the monitor will automatically inflate.

Following the self-test, during which all display elements

briefly appear, the measurement begins. During inflation

the device already determines measured values used to

estimate the required inflation pressure. If this pressure is

insufficient, the device automatically inflates by another

40 mmHg (Real Fuzzy Logic).

•

Then the pressure in the cuff is slowly released and the

pulse is measured.

•

When the measurement has been completed, the remain-

ing air pressure is released very quickly. The pulse, the

systolic and the diastolic blood pressure are displayed.

•

The device requires approx. 5 seconds to store the deter-

mined measured value.

•

You can interrupt measurement at any time by pressing

the ON/OFF button .

•

To switch off and release the pressure, press the ON/OFF

button again. If you forget to switch off the device, it

switches off automatically after approx. 1 minute.

Wait at least 5 minutes before taking another measurement!

• • • • • • • • • • • • •

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 87 88

Comments to this Manuals

No comments

Beurer BC 16 User Manual Page 18

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer BC 16