Beurer BC 44 User Manual download pdf (Page 14)

•

Do not inflate the cuff unless wrapped around wrist.

•

If no button is pressed for approx. 1 minute the automatic

shut off function shuts off the unit in order to preserve the

batteries.

•

Do not touch the unit and cuff and/or press any buttons

when measurement is in progress, except for stopping the

measurement. Doing so may cause incorrect readings.

5.4 Taking Measurement

NOTE:

If you are using the unit for the first time, please remove the

protective film from the display.

•

Put on the cuff around your bare left wrist as described

previously and assume the position in which you want to

carry out the measurement.

•

Start the blood pressure monitor with the start/stop but-

ton . A beep and a brief display of all the symbols con-

firm that the device is switched on.

•

Before the measurement, the last saved test result is briefly

displayed. If there is no measurement in the memory, the

instrument always displays the value “0”.

•

The cuff is pumped up to 190 mmHg. Cuff air pressure

is released slowly, the pulse symbol

is flashing and

the pulse is measured. As the cuff deflates, decreasing

numbers appear on the display.

If a tendency towards high blood pressure is already de-

tectable, the cuff is pumped up again and cuff pressure

increased further. The pulse symbol

flashes as soon

as a pulse is found.

•

After the pressure has been completely reduced, the sys-

tolic pressure, diastolic pressure and pulse readings are

displayed.

•

Measuring can be interrupted at any time by pressing the

start/stop button .

•

“Er_” appears if it has not been possible to perform the

measurement properly. See section 8. on error messages/

troubleshooting and repeat the measurement.

•

The test result is saved automatically.

•

To switch off press the start/stop button again. If you

forget to switch off the device, it switches off automati-

cally after approx. 1 minute.

Wait at least 5 minutes before taking another measure-

ment.

6. Evaluating results

WARNING:

This product does not and is not intended to provide a

•

medical diagnosis. Measurements results are for refer-

ence only. Self-diagnosis and treatment, e.g. regarding

medication, using measured results represent a risk for

your health. Always consult with a licensed physician

for determination of appropriate medication and dos-

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments

Beurer BC 44 User Manual Page 14

Comments to this Manuals

Related products and manuals for Health and hygiene Beurer BC 44